Over the past few years, we’ve seen a mass migration from the work office to the home office. This continues to increase the requirements for better home network security, capacity, and additional capabilities. Small business and work-from-home networks must be more performant, reliable, accountable, and easier to manage. As such, network devices designed for consumers and small business customers are more critical than ever before!
At the beginning of 2020, I published the article Home Lab Beginners guide to hardware, where I briefly touched on some of the available choices for network devices such as routers, firewalls, switches, and so on when building out a home lab. I’ve learned a lot over the past year. For one thing, the choice of router and firewall combo is arguably one of the most important decisions you’ll make for your small business or home office network.
In This Article
Work-from-home and Small Business Network Devices
Back in 2021, I hit a limitation with my Edgerouter 10x. I’ve since replaced it with a pfSense firewall appliance: see My $300 pfSense Firewall Appliance – Part 1: Unboxing, pfSense Firewall 2.8: Install & Config, and Choosing the Perfect Network Firewall Device for under $300. Meanwhile, I wanted to share some of the devices which we should all consider when building out a small business or home office network.
The network devices below include entry-level models; you can determine if you’ll need more processing power, memory, network ports, and features.
As usual, I do not link to or recommend devices or services that I haven’t either personally used or spent extensive time researching. As such, I’ve included affiliate links to the devices I have confidence in. If you find better deals, please add the links in the comments section, as well as any feedback about the devices you are using, planning to order, or currently researching. Let’s get right into it, shall we? 5 Network Devices for your Home Office or Small Business:
MikroTik hEX S – Network Router
Warning: Objects in the above photo may appear to be larger than the actual size.
Out of the gate, the MikroTik hEX S five-port Gigabit Ethernet router is probably one of those few purchases where you aren’t likely to have buyer’s remorse. You can pick these up for around $70. With the hEX S, you can connect fibre directly from your ISP to the router. The router is also capable of full gigabit ethernet up and down.
Update (November 2026): MikroTik has refreshed this router as the hEX S (2025) (E60iUGS), with an ARM CPU, 512 MB of RAM, a 2.5G SFP port and RouterOS v7. It now sells for less than the original.
Pros:
- Inexpensive.
- SFP port (2.5G on the 2025 model).
- Gigabit speeds (with basic setup).
- PoE capable.
- Supports MicroSD storage (original model; the 2025 model has USB instead).
- Low power consumption. Starting @ 6 watts.
- It can be configured entirely using a web browser (192.168.88.1).
Cons:
- RouterOS has a bit of a learning curb.
- PoE requires a more powerful power supply.
- Lacks documentation.
- They have limited free support. Check the support forums.
Consider:
More powerful/capable options from Mikrotik:
Also, compare with Ubiquiti’s EdgeMax line, for example, the ER-X-SFP or its big brother, the ER-12.
ZimaBoard 2 Single Board Server
Update (November 2026): The ZimaBoard 2 replaces the original 832 covered below. It moves to an Intel N150 CPU with DDR5 memory, dual 2.5GbE ports, dual SATA and a PCIe 3.0 x4 slot. The 8 GB model sells for around $360.
The ZimaBoard 832 is a single-board server designed to be a low-power, compact, and versatile computing solution. It is not just a simple single-board computer (SBC) like the Raspberry Pi, but rather positions itself as a single-board server (SBS), meaning it is geared more towards server applications, networked solutions, and IoT projects that may require a more robust connectivity and storage options.
Here’s an overview of its features:
- Processor: It usually comes with an Intel Celeron processor, which offers a good balance between power efficiency and computing performance for server tasks and some light desktop applications.
- Memory: The ZimaBoard 832 model typically features 8GB of LPDDR4 memory, which is quite generous for an SBC and allows for multitasking and more demanding applications.
- Storage: It has onboard eMMC storage and also offers SATA connectivity, which means you can connect it to a hard drive or SSD for additional storage, making it ideal for network-attached storage (NAS) applications.
- I/O capabilities: It generally includes multiple USB ports, HDMI output, and often has both Gigabit Ethernet ports and a PCIe port, which can be used for additional expansions such as adding a network card for more network interfaces or other PCIe-compatible hardware.
- Operating System Compatibility: The ZimaBoard is compatible with various Linux distributions as well as Windows, which allows for flexibility depending on the user’s preference or project requirements.
One of the main selling points of the ZimaBoard is its ability to act as a DIY NAS, personal server, or even as a router if you have the know-how to configure it. Its PCIe expansion slot is a differentiator from many other SBCs, which typically do not have such capability. Users can leverage this for various projects that benefit from custom hardware configurations.
For developers, hobbyists, and IT professionals, it offers a platform that is not only affordable but also powerful enough to host websites, manage home automation, or even act as a private cloud server. Linux compatibility also means it can be a great tool for those looking to develop or run Linux-based applications or services.
Pros:
- Offers a wide range of ports and expansion capabilities.
- Equipped with up to 8 GB of RAM for efficient multitasking.
- Low-power consumption with adequate performance.
- Supports multiple Linux distros and Windows.
- Small and fanless for quiet operation.
Cons:
- The Celeron processor may struggle with intensive tasks.
- It’s more expensive compared to some other SBC options.
- It might have a steeper learning curve for new users.
Alternatives to consider are the Raspberry Pi 5 (see What to buy for your Raspberry Pi 5) and the Orange Pi 5, or the newer Orange Pi 6.
Firewalla Purple SE
Not to be confused with Firewalld.
The Firewalla Purple SE makes this list over the Firewalla Gold SE because of its value. At around $300 (it launched at $229), the Firewalla Purple SE is a very competent plug-and-play cybersecurity appliance. It features simple enterprise-like security features for your small business or home network.
The more expensive Firewalla Gold SE and Gold Plus can be used as a whole-home router, with much faster throughput capacities and supports virtual and segmented networks.
Pros:
- Simple to set up and use.
- Reports open ports.
- Reports devices that are sending out data.
- Built-in WireGuard VPN server.
- Good support. The Firewalla team communicates directly via the support forums and Subreddit.
Cons:
- Suitable only for ISP speeds up to 300 to 400 Mbps.
- Some features, like ad-blocking, are too simple and lack granular control.
- A bit pricey. (although there are no yearly license fees).
Consider:
Brume 2 – Security Gateway for Remote Access
Update: This update replaces the original Brume (GL-MV1000), a non-wifi cousin of the Brume-w (2.4GHz WiFi capability). The original Brume sold for $120. The all-new Brume 2 starts at around $90.00.
Update (November 2026): GL.iNet has since released the Brume 3 (GL-MT5000) at around $130. GL.iNet rates it at over 3x faster than the Brume 2, with WireGuard up to 1.1 Gbps. The Brume 2 is still a good budget option.
If you are looking for an inexpensive Wireguard or OpenVPN client to cover your office or home network, the Brume is a pretty practical solution. It runs the OpenWrt operating system and is designed to host a VPN server at home or run SD-WAN (Site-to-Site) for small and medium-sized enterprises.
Pros:
- Great bang for the buck.
- Good Wireguard and OpenVPN performance.
- Compatible with 30+ VPN providers. Easy setup!
- Pre-installed with OpenWrt.
- Supports MicroSD storage. (up to 256GB)
- Connect an external SSD via USB for network file sharing.
- Functional and straightforward GUI.
- Simple first-time setup.
Cons:
- Wireguard is specified at around 355 Mbps.
Consider:
Netgear Nighthawk M7 Pro – 5G modem + hotspot
Update (November 2026): The 4G Nighthawk M1 is no longer sold new in the US, so this section now covers Netgear’s current 5G model, the Nighthawk M7 Pro.
If your office or home office is located in or near a city, you may not need this. However, if you’re located in a rural area with limited or unreliable ISP options, the Netgear Nighthawk M7 Pro 5G hotspot may be of interest to you.
It can easily be set up as an auto-failover or even combined with your main ISP for seamless dual WAN (when used with a dual-WAN capable router).
Pros:
- 5G (Qualcomm Snapdragon X75) with tri-band Wi-Fi 7, for up to 64 devices.
- 2.5 Gbps Ethernet port that can plug directly into your router’s WAN port.
- Removable 5185 mAh battery (up to 13 hours), or run it without the battery when plugged in.
- 2.8-inch touchscreen and web GUI for easy setup.
- Built-in URL filtering and device blocking.
Cons:
- Expensive.
- The Amazon listing is the AT&T version, so check that it works with your carrier before buying.
- Internal antennas can still struggle in fringe areas.
Consider:
I’m using the Netgear LB1120 4G LTE modem, which meets my speed requirements. If you need faster 4G or even 5G speeds, check out Netgear’s entire lineup. Compare this with GL’s 4G Smart Routers.
Previously suggested devices
Netgate 1100 (formerly SG-1100) – Network Firewall Device – The Netgate 1100 is Netgate’s replacement for the highly successful SG-1000 at 5X the speed and 2X the RAM. That said, you won’t be blown away by its speed. It gets the job done!
Get up to 500 Mbps of throughput when used as a firewall and up to 1 Gbps when used as a router. It features firewall packet filtering performance, load balancing, pfSense software, intrusion detection system (IDS), intrusion prevention system (IPS), VPN, and more.
Pros:
- Excellent entry-level value to gain access to a ton of features.
- Helpful documentation.
- Easy GUI management.
- Heavy on features: firewall, DNS resolver, NetFlow collector, router, VPN endpoint, logging, etc
- Pre-loaded with pfSense Plus software.
- Low power consumption, stating < 4 watts.
Cons:
Additional Network Devices and Services for work-from-home and Small Businesses
Bitdefender Box – IoT security for all your devices.- Cisco – Solutions designed for small businesses.
- Cujo AI – Network intelligence software.
- Fortinet Next-generation firewalls (NGFWs) – filter network traffic to protect an from internal and external threats.
- IPfire – firewall.
- Linksys – professional network devices and accessories.
- Netgear – work-at-home network devices.
- Protectli – appliances built for Open-Source Software.
- Sonicwall – Next-Gen Firewalls & Cybersecurity Solutions.
- Sophos – Fully Synchronized, Cloud-Native Data Security.
- TP-Link – Networking Equipment for Home & Business.
- Ubiquiti – Network devices and technology.
Untangle – firewall software and appliances.- Watchguard – Enable Remote Work Security.
- Zyxel – Network devices and software.
Conclusion
To wrap up, we’ve explored five networking devices suitable for consumers and small businesses. Your choices are abundant, and to broaden your horizon even further, consider delving into the world of OPNSense custom-builds or evaluating established solutions like the SonicWall and Zyxel, among many possibilities.
The shift from traditional office environments to home offices underscores the importance of selecting the right networking devices for small businesses and remote work setups. It’s a pivotal moment to reassess your network’s capabilities. What devices have stood out to you, and which would you suggest or currently use? Your insights could greatly benefit others navigating these crucial decisions.
Published: April 26th 2021 | Last updated: November 9th 2026
